Finishing that makes clothes look new again

Cleaning is only half the job. Our finishing line uses Cocchi steam equipment, from form finishers and pneumatic presses to vacuum ironing tables, to relax creases, restore shape and set a finish that lasts.

Steam rising from an iron
CocchiProfessional ironing equipment

How pressing works

Steam, heat and vacuum, in that order

Pressing is controlled physics. Steam swells the fibres and loosens the bonds between their molecules. Shaped under heat, those bonds re-form in a smooth position, so the surface stays flat when the iron lifts. Vacuum then draws out moisture and cools the fabric to hold the finish.

  • Steam relaxes fibres without scorching them
  • Air and vacuum set the shape as the fabric cools
  • The right tool for each garment, never one iron for everything

Cocchi is one of Europe’s leading makers of professional ironing equipment, known for pairing a wide range and advanced technology with fair prices.

The finishing line

Three stations, one finished garment

Large garments start on the form finisher. Presses shape flat areas quickly, and the vacuum table handles the details by hand.

  1. 01

    Form finisher

    Jackets, coats and overcoats are dressed on a steam-and-air form that relaxes wrinkles from the inside out.

    CG/B series
  2. 02

    Press

    Trousers, shirts and flat panels are shaped between a steamed buck and head for sharp creases and smooth surfaces.

    CG-PR series
  3. 03

    Vacuum table

    Collars, cuffs, pleats and delicate fabrics are finished by hand, with vacuum to set every detail.

    ASP/1 series

Equipment

The equipment, in detail

Cocchi · Form finishers

CG/B, CG/B1 and CG/B1X

A steam-and-air form for jackets, coats and overcoats, the large garments that are hardest to iron flat. It is used before the press or ironing table, with three programmes (steam; steam and air; air) and an electronic regulator for blowing speed and power.

Programmes
3
Boiler (CG/B)
15L
Boiler elements
7.5–12kW
Blower (CG/B, B1)
1.7HP
Blower (CG/B1X)
3.0HP
Steam valve (B1X)
½″pneumatic

Models

CG/B

Built-in 15 L boiler with 7.5, 9 or 12 kW elements and a 1.7 HP blower.

CG/B1

No boiler: an 8 L steam tank and a steam radiator for hot air, for sites with a steam supply.

CG/B1X

Industrial version: 3 HP blower, ½″ pneumatic steam valve and a large steam radiator.

Options

Steam brush + superheaterSteam gunFront pneumatic paddlesRear pneumatic paddles

Cocchi · Presses

CG-PR, CG-PE and CG-PM

Steam presses with steamed bucks for fast, even finishing of trousers, shirts and flat panels. Two-button closing keeps the operator’s hands clear, and suction, air and steam can come from a central supply or be built into the unit.

Steam generator
23L
Heating
9–15kW
Steam consumption
16–18kg/h
Steam pressure
5atm
Suction motor
0.75HP
Compressor motor
1.5HP

Models

CG-PR

Pneumatic, high-speed press with adjustable pressing force and a choice of buck sizes.

CG-PE

Pneumatic press with a universal buck for a mixed range of garments.

CG-PM

Manual-closing press with the same steamed buck.

Options

Steam generatorExhaust fanCompressorVacuum ironing armSteam-air gunAdditional iron

Cocchi · Vacuum ironing tables

ASP/1 and AS/2

A heated, pneumatic vacuum table for detailed hand finishing. The aluminium top resists rust and corrosion, the boiler supplies steam to both irons, and electrical and steam connections for a second iron are ready from the start.

Boiler
6L
Boiler element
3.6–4.7kW
Board heating
1,000W
Iron element
1,000W
Suction motor
0.5HP
Irons
1–2

Models

ASP/1

Built-in 6 L boiler that supplies steam to both irons.

AS/2

Boilerless version of the ASP/1, for sites with a steam supply.

Options

Water pumpSecond steam solenoid valveSecond steam ironElectronic ironSteam gunSpotting armHeated vacuum sleeve armLampSpray water tank6,000 W boiler elementSteam tank (AS/2)

For your garments

Which finish for which garment

Typical finishing routes. Our specialists adjust temperature, steam and pressure to every fabric and its care label.

Typical finishing route for each garment type
GarmentFinishing route
Suits & blazersForm finisher, press for trousers and panels, lapels and details by hand
Coats & overcoatsForm finisher, then collars and linings on the vacuum table
ShirtsPress for body and sleeves, collar and cuffs finished by hand
KandurasPressed and hand-finished for a crisp collar and a sharp front
Dresses, abayas & silkSteam and vacuum table by hand, at low temperature
TrousersPress for a sharp, even crease

Specifications are manufacturer data for the Cocchi equipment used in the DryCenter concept. Exact models may vary by facility.

Keep exploring

More about DryCenter

Our story, the equipment behind every order and practical advice from our specialists.

Chat with us